Michigan Power & Energy Laboratory
Michigan Power & Energy Laboratory
Michigan Power & Energy Laboratory Michigan Power & Energy Laboratory

Applying to the Power and Energy Lab

Power and Energy is now available as an area of study for Master's and Ph.D. students. For info on how to apply to the ECE grad program, click here.

For more general information about studies at U-M ECE and life at the University, click here.

Courses in Power and Energy

Power Electronics - EECS 418

Meeting the future's energy and environmental challenges will require the efficient conversion of energy. For example, renewable forms of energy must be integrated with the nation's 60Hz AC electricity grid. Furthermore, hybrid electric vehicles require efficient energy conversion in order to improve their fuel economy over conventional vehicles. Power electronic circuits are a key component of these systems. Power electronic circuits are circuits that efficiently convert one form of electrical energy (e.g., AC, DC) into another.

This course will discuss the circuit topologies used to efficiently convert AC electrical power to DC, DC power from one voltage to another, and DC power to AC power. The components used in these circuits (e.g., diodes, transistors, capacitors, inductors) will also be covered in detail. A key aspect of power electronic circuits is the control algorithm used to achieve the desired behavior (e.g., output voltage regulation), and so control theory as it applies to these circuits will also be discussed.

Electric Machinery and Drives - EECS 419

In the struggle to address today’s energy and environmental challenges, many potential solutions require electro-mechanical energy conversion.  Examples include electric propulsion drives for electric and hybrid electric vehicles, generators for wind turbines, and high-speed motor/alternators for flywheel energy storage systems. Each of these systems contains: an electric machine operating either as a motor, a generator, or both; a power electronic circuit which interfaces the machine to a power supply or an electrical system; and a controller which measures electrical and mechanical quantities and uses this information to control the power electronic circuitry.

In this course we will cover fundamental electromechanical, power electronic, and control theory in the context of electric drive systems. The capabilities and limitations of different types of electric machines (e.g., permanent magnet, induction) in various drive applications will be covered.  MATLAB®  Simulink® models will be used throughout the course to give students exposure to the dynamic behavior of these systems. Finally, a three-hour lab will be held each week to give the students hands-on experience with electric machines and drives.

Power System Design and Operation - EECS 463

The course will establish the basic principles of power system operation and control, under normal conditions and when faults occur. It will develop the models and tools necessary for analysing system behavior, and provide opportunities for using those tools in design processes. Optimal generation dispatch will be developed, and electricity market implementation issues addressed. The impact of renewable generation on power system operation will be considered.

Grid Integration of Alternative Energy Sources - EECS 498 [FLYER]

The course will present a variety of alternative energy sources, along with energy processing technologies that are required for power system connection. System integration issues will be addressed, with consideration given to impacts on current power system design philosophies and operating principles. Topics will be covered at a level suited to establishing a broad understanding of the various technologies, and of the associated system implications.

Power Semiconductor Devices - EECS 598 [FLYER]

Power devices are at the heart of all modern electronics, from the grid and renewable energy sources to fuel-efficient vehicles and mobile devices. In this course we will cover design and operating principles of semiconductor switches and rectifiers for discrete and integrated power electronics. Devices to be discussed include power MOSFET, IGBT, HEMT, thyristors, Schottky and PiN diodes, as well as new and emerging device architectures. We will look at power semiconductor substrates, device fabrication, packaging, and thermal modeling. Students will learn how to model power devices using commercial software and will do a group presentation on a topic of their choice. This course is pre-approved as a Flexible Technical Elective for undergraduate EE majors and an EECS elective for CE majors. Within the ECE graduate program, this course has been pre-approved as a Major Course for Solid State/Nano and as category "E" for VLSI/IC and Power and Energy.

Analysis of Electric Power Distribution Systems and Loads - EECS 598 [FLYER]

This course covers the fundamentals of electric power distribution systems and electric loads. Most power system courses focus on analysis of transmission systems; however, with increased amounts of distributed generation (photovoltaics, small-scale wind), distributed storage, and controllable loads, it has become more and more important for researchers and power industry professionals to understand power distribution systems. We will start with an introduction to distribution grids, including their components, typical topologies, and operational strategies. We will then study power flow in distribution grids and distribution transformers. Additionally, we will discuss the fundamentals of electric loads, including electric load modeling, analysis, and control methodologies. Course material will be from a combination of textbooks and recent research articles in the field. In addition to technical topics, we will also discuss energy economics and policy related to distribution grids and loads. All students will conduct an individual research project on a topic related to the course material.

Power Systems Markets and Optimization - EECS 598 [FLYER]

This course covers the fundamentals of electric power system markets, and the optimization methods required to solve planning and operational problems including economic dispatch, optimal power flow, and unit commitment. The course will highlight recent advances including convex relaxations of the optimal power flow problem, and formulations/solutions to stochastic dispatch problems. Problems will be placed in the context of actual electricity markets, and new issues, such as incorporation of renewable resources and demand response into markets, will be covered. All students will conduct an individual research project.

Electromechanics - EECS 598 [FLYER]

It is imperative that society finds new solutions to the generation and usage of energy. Many of the current approaches to achieving these objectives (e.g., wind power, electric and hybrid electric vehicles, energy harvesting) require efficient conversion of mechanical energy into electrical form, and vice-versa. In this course we will discuss the analysis and design of electromechanical devices, with an emphasis on power and energy applications. Devices based upon mechanical forces generated by both electromagnetic fields and materials with electromechanical material properties will be considered. In addition to homework assignments, midterm, and final, the course will have a final design project. This project will be selected by the student, and will be approved by the instructor provided it has significant electromechanical design content.

Advanced Topics in Electric Drives - EECS 598 [FLYER]

In the struggle to address today’s energy and environmental challenges, many potential solutions require electro-mechanical energy conversion. Power electronic converters, and their associated control algorithms, allow the precise control of the torque/speed/position of rotating machines in challenging applications, such as high-
performance electric vehicles and high-speed flywheel energy storage systems. This course will cover advanced topics in electric drives.

Advanced Topics and the Design of Power Electronics - EECS 598 [FLYER]

Transformative technologies in energy conversion will be smaller, cheaper, and more efficient.  This class will address some advanced topics and techniques in power electronics and the craft of design through case studies.  Topics may include switched capacitor circuits, resonant power conversion, magnetics, wireless power transfer, and instrumentation, among others.  Advanced methods in the analysis, manufacturing, and control of power electronics will also be discussed.   Design cases may include audio switching power amplifiers, photovoltaic switch capacitor circuits, resonant converters for wireless power transfer, and solid-state lighting drivers, among others.  Grading will be based on 3-4 hw problem sets, 3-4 design problems, and a term-long final project with topics, specifications, and milestones agreed upon by the instructor and by teams composed of up to two students.   Grading for the final projects will include 15-20 minute in-class presentations and short papers of each individual student’s contribution.

Infrastructure for Vehicle Electrification - EECS 598 [FLYER]

This course covers the fundamentals of the physical and cyber infrastructures that will underpin largescale integration of plug-in electric vehicles. PEV charger technology will be examined, with a view to establishing grid-side characteristics. V2G converter requirements will be considered. The physical power system infrastructure will be presented, beginning with an overview of power system structure and operations, through distribution system design, to consumer installations. Quality-of-supply issues and protection requirements will be addressed. The information infrastructure and regulatory framework required to support various business models for flexible PEV charging and V2G applications will be presented. Control strategies that are appropriate for large-scale PEV integration will be considered. Upon completion of the course, students should have a comprehensive knowledge of the structure, capabilities and limitations of the physical and cyber infrastructures required to support PEVs.

Power System Dynamics and Control - EECS 598 [FLYER]

This course will introduce angle and voltage stability concepts and consider control strategies for improving dynamic performance. It will provide and overview of nonlinear dynamical systems, including geometrical properties of solutions, Lyapunov methods for approximating the region of attraction, and bifurcation.